Photoshop Srbija
REGISTRUJTE SE I ISKLUCITE REKLAME!
Pogledajte http://photoshopsrbija.forumsr.com/t82-donirajte-i-pomognite-sajtu-samo-100din-ce-pomoci

Takodje, morate biti registrovani i ulogovani da bi videli celokupan sadrzaj foruma. Klknite na "Register" ispod. Nije potrebna email potvrda.


Uci, skidaj, konsultuj se, pokazi svoje znanje! Sve na jednom mestu! Sve na Photoshop Serbia!
 
HomePortalMemberlistRegisterLog in

 | 
 

 Constant Slip [Proffesional]

View previous topic View next topic Go down 
AuthorMessage
Rappix
Admin
Admin


Join date : 2011-01-08
Age : 23
Posts : 105

PostSubject: Constant Slip [Proffesional]   Fri Jan 28, 2011 5:07 pm

Step 1


Before we start, you need to know that the shining effects work best on a black background. The darker the background is, the more visible and contrasted shine you will achieve. So I started with a black background of the canvas around 900px by 1100px (this should work for you fine).


[You must be registered and logged in to see this image.]

Step 2


Now is the first hard part, searching for the right image. I know many people are unhappy with buying pictures, but well, the truth is: if you want good quality, you need to pay for it. I’ve nothing against free stock photos, if you have the time to search for a good image among mixed quality free pictures it’s OK.


Anyway, if you have the right image, then extract the [You must be registered and logged in to see this link.] (or object) from the image of your choice. The biggest problem of all cut-outs is always the hair. But, as you can see in the image below, I had a short haired man. In this case I simply used the Pen Tool to deal with short hair. And because we have a black background in our main project document, we can easily blend this black hair with the background. To do this I used the Burn Tool with Range set to Midtones and burned the hair edges a little.



[You must be registered and logged in to see this image.]

Step 3


Now, in the Layers Palette I added two adjustment layers: Levels and Gradient Map to make a better blending between this person and the black background. I used a gradient from black to white and set the Gradient Map layer’s Blending Mode to Soft Light, then lowered the Opacity just a touch.


[You must be registered and logged in to see this image.]

Step 4


OK, next we’ll create ground. I used a Gradient Tool and on a new layer created a radial gradient from white to transparent (as you see in the first picture below). Then this big white dot needed some perspective, so here I hit Command + T to Distort (second image below).


The dot was blurred using Gaussian Blur at around 40 pixel Radius. Then I duplicated this blurred dot, stretched it a little bit (Command + T) and made two more copies to enhance the ground effect. If necessary, the opacities of these ground layers can be lowered just a touch. It means that this surface shouldn’t be too bright, as this will kinda destroy the concept of having the whole background black.


[You must be registered and logged in to see this image.]

Step 5


Now, as you can see in the first image below, I started adding shadows under the shoes. It’s not suppose to be great and totally pimped shadow. I just needed to make an accent that this man is standing on something. This always works pretty well, as you start to see how your illustration is shaping up, even thought the shade will change, it’s good to have it sketched.



To do the shadow I used a black brush with Flow set to 2% and Hardness to 0%, then I slowly started creating it click by click (don’t hold the left mouse button while doing this, as you may make a very ugly kind of shadow that way). Individual brush clicks did the job just fine.


Now let’s focus on the second image below. Something didn’t work for me in this piece, so I decided to add the first dynamic touch to this illustration, so I selected all the layers and used Command + T to rotate them at a small angle (for now it looked kinda like a slip).


[You must be registered and logged in to see this image.]

Step 6


I zoomed out and positioned this man and ground to the right. I kinda wanted to avoid the center focus of illustration. Sometimes it’s good to move the main object/person to the side, looks more dynamic and original to me.


OK, then I decided that this position works perfectly for this piece and started touching up shadows. Looking at this man it’s visible that few sources of light hit him (for example his left hand shows that light reaches it from left and right). So in this case I decided to give this man a soft shadow, only underneath him by using the same technique as previously.


I only want you to pay attention to his shoes which are the closest objects to the ground. Shoes stick to the surface, this means they need more shadow around them. The farther the objects are from the ground, the more they start to disappear (and the shadow starts to soften, then slowly vanish).


[You must be registered and logged in to see this image.]

Step 7


As I was watching my illustration now, I felt like there are some spots that are too bright, so I used the Burn Tool to enhance the shade effect of the shoes. I also did some blending with the hand, as It seemed too bright on the left side.



[You must be registered and logged in to see this image.]

Step 8


Finally this man is ready. Now this illustration needs to look more like one piece. So I did some overall color adjusting. I added a Curves adjustment layer and then a Gradient Map with a Violet to Orange gradient (picked from standard presets). Then I lowered the Opacity of the Gradient Map to around 25-30% and changed its Blending Mode to Soft Light. Both adjustment layers were set up to give this illustration a yellowish touch (as I experimented and liked it).


[You must be registered and logged in to see this image.]

Step 9


Now it looks like this man really belongs to this place, and that’s the thing we want. Next, I started all the light tricks.


Here is something [You must be registered and logged in to see this link.] that I prepared for this piece. So I opened these lights and dragged them into the project while changing its Blending Mode to Linear Dodge. It was put above all layers just not to get colorized by two previous adjustment layers.


Now look at the process. As I already had these abstract lights, I took the Burn Tool (Midtones) and burned parts of this piece that I wanted to get rid of (2nd image below). Then many less of these lines lasted, so I used a hard Eraser Tool to erase the rest of the disturbing lines, which I didn’t want to see here (3rd image below). Finally I added Image > Adjustments > Color Balance and adjusted this color exactly for these three main lines (blue, green and yellow). I worked to achieve cool, bright coloring for these lines.


This can be done for each line separately, but before that they need to be cut out into new layers.


[You must be registered and logged in to see this image.]

Step 10


As I said, if you don’t have some color experience, this tutorial will be difficult for you to follow. Now is the further part when I repeated the same process as in the previous step. I created, erased, separated new lines and added various colors.


[You must be registered and logged in to see this image.]


Step 11


I was still into adding color light lines, and I want to show you another example of flexible work. During this process I had many ideas of how to connect and set these lines.


First I thought maybe a good idea would be to cross them and make them in different positions (1st image below). This didn’t work out and I decided to make all the lines almost parallel (2nd image below). So I made it, and for some variation I added one green line that kinda crossed the space, but it gave some depth to the illustration so I left it be.


[You must be registered and logged in to see this image.]

Step 12


Now I added some more brightness in places indicated below using soft white brush. The new layer was created below the lines layers, as these lines are half transparent (cause of the linear dodge mode), so everything put below these lines is visible.


[You must be registered and logged in to see this image.]

Step 13


I played around with these lines and achieved some cool results (first image below). All done the same way as I showed previously.


Next I felt like this piece needs some more details going all around it and filling in some blanks. You can find some similar [You must be registered and logged in to see this link.] to the ones I used for this. Experiment with various brushes in this step.



I picked one my grungy splatter brushes. Then found a nice dark color (coming from the color that I used in light lines – in my case it happened to be blue) and made a brush mark (second image below). Then I brought up the selection of this brush mark and contracted it by 2 pixels by going to Select > Modify > Contract (third image below). Next I hit Delete to get rid of the center brush part (forth image below). Then I positioned it near a light blue line.


[You must be registered and logged in to see this image.]

Step 14


Now as I had this brush mark placed correctly, I used a soft eraser and erased disturbing parts. Then switching between the Burn Tool (Midtones) and Dodge Tool (Highlights) I pimped out selected dark spots of this brush mark.


When using the Burn Tool you actually darken the spot. When using the Dodge Tool, you brighten it up. So I was very careful in this step, a small overdo can destroy the idea.


So this process is just to show you how it works, the brush mark in the first three images below are just an example. In the forth image below you can see the brushes that I used originally.


[You must be registered and logged in to see this image.]

Step 15



By the way we’re still with these brushes, pay attention to the little pieces above the man’s head (first image below) and the ones near his leg (second image below). Yes, they were made the same way as previously. To do this you can even use some splatter brushes and follow the same process.


Also pay attention to the second image below. I indicated a spot that points to shadow. This shadow made an illusion that these little pieces are in the air. So if you get more small pieces around the ground, you can cast some shadows underneath them (but on the ground) and this will give your effects more depth.


[You must be registered and logged in to see this image.]

Step 16


Next to to add some sparkle to this illustration I decided to use a picture of [You must be registered and logged in to see this link.] and cut the sun out of it. Then I desaturated this piece (second image below) and set its Blending Mode to Linear Dodge and I erased all the unnecessary parts around this sun (with the Eraser Tool). I also brought up the Levels (Command + L) and enhanced the contrast. Then I used Burn Tool (Midtones) to enhance the light effect and darken the rays (fourth image below). Finally, I colored this sun using Hue/Saturation and Color Balance, I made it green and then gave it a touch of yellow.


[You must be registered and logged in to see this image.]

Step 17


The sun was resized down to a very small size, and at this size it completely stops being recognizable as a shining sun. Now it’s just a shining spot. I duplicated it many times and placed it in various spots. By the way, I changed the color when it was necessary to make these lights fit. To change colors I followed similar steps as before (basically Hue/Saturation and when the tone was not fully satisfying I pimped it with Color Balance).



[You must be registered and logged in to see this image.]

Step 18


Moving forward I thought I’d use these [You must be registered and logged in to see this link.] to make some dust. So I opened the image and desaturated it. Then (as previously) I used Levels (Command + L) to make the clouds stand out. Next, I used a soft Eraser and got rid of unwanted parts (fifth image below). Finally, I grabbed Burn Tool (Midtones) and made some touch-ups to these clouds. I kinda separated them and brought them up more.


[You must be registered and logged in to see this image.]

Step 19


I named these clouds "Dust" and changed the layer’s Blending Mode to Linear Dodge. Then rotated them and placed them towards the lines direction (as you can see in the image below).


I made a small comparison below, the whole illustration got a little bit smoother when I added this dust.


[You must be registered and logged in to see this image.]

Step 20



So the illustration was almost finished, but the light lines were still not blended enough with the model. I hit Command + A to select the whole canvas, and then Command + Shift + C (copy merged) and Command + V (paste). This way I made a duplicate of the whole image and put it on top of all the layers.


Then while having this image selected, I went to Filter > Liquify and as you can see in the first image below, I did some stretching using the Forward Warp Tool (in Liquify filter). In the second image below you can see how smooth and nice these lines were blended.


[You must be registered and logged in to see this image.]

Step 21


As the final touch I wanted to give this piece a little more realism, so I casted light reflections on this man’s clothes and skin. Each arrow below has the color of the nearest line. For example, the first orange arrow point of the shirt spot which should be affected by the orange light line. So I gave an orange color to this spot, and so on with the others.


To do that I made a new layer with the Blending Mode set to Color (Soft Light in some cases works fine also), then I used a very soft brush with proper color, and Voilà!


[You must be registered and logged in to see this image.]

Conclusion


In the end you can give it a nice overall sharpen using highpass filter, this will bring even more quality to your work. So I hope you liked this piece, thanks for reading. The main purpose of this tutorial was to show you a good direction in how to use these effects. So be creative and try to discover your way of using them.



You can view the final image below or view a [You must be registered and logged in to see this link.].


[You must be registered and logged in to see this image.]

____________________________________________________________________
Za sve probleme i poteskoce posetite [You must be registered and logged in to see this link.].
Ako nesto ne postoji ovde,a nije vam jasno, slobodno mozete postaviti vase pitanje.
Ako vam se svidja post ili vam je nesto pomogao, kliknite na [You must be registered and logged in to see this image.] u gornjem desnom uglu. Hvala unapred...
Back to top Go down
http://photoshopsrbija.serbianforum.info
 

Constant Slip [Proffesional]

View previous topic View next topic Back to top 

 Similar topics

+

Jump to:  
Create a forum | © phpBB | Free forum support | Report an abuse | Forumotion.com